Design & Drawings:

• 2D Floor Plan
• 3D Elevation
• Structural Design

Structure:

• Steel: Kay2, Prabal, Jindal, Kamdhenu
• Aggregates: 20mm, 40mm
• Bricks: Standard Clay Brick (9″ Exterior Walls & 4.5″ Interior Walls)
• Cement: JK, UltraTech, ACC, Ambuja
• Sand: M-Sand, River Sand
• Waterproofing: Dr. Fixit, Kamdhenu, Asian Paints
• Foundation: 5 feet deep foundation (additional charges if clayey or rocky strata found)
• PCC 100mm below ground floor flooring
• Plastering: 1:4 cement mortar
• Plaster thickness: 10 to 12mm
• Chicken mesh at beam, column, and masonry wall junctions ( Additional Charges)

Kitchen:

• Ceramic Wall Tiles, 4 feet above kitchen slab
• Main Sink Faucet (Jaquar/Parryware/Hindware or Equivalent)
• Any Other Faucet & Accessories (Jaquar/Parryware/Hindware – Premium)
• Kitchen Sink (Stainless Steel Single Sink or Granite)
• Kitchen Granite 38mm thick
• Polished granite 600mm width, 40mm thickness for platform with a sink
• Provision for water purifier inlet near kitchen sink
• Exhaust fan provision if required
• Drainage, Water Pipelines fitting
• PPR, CPVC, GI pipes

Washroom:

• Bathroom Ceramic Wall Tiles, 7 feet height
• Sanitary Ware & CP Fittings (Kohler, Jaquar, Hindware, Parryware or equivalent)
• EWC, Health Faucet, Wash Basin with accessories, 2-in-1 wall mixer, Overhead Shower
• Bathroom Accessories (Mirror, Soap Dish, Towel Rail)
• Waterproof flush doors for bathrooms
• Drainage, Water Pipelines fitting
• PPR, CPVC, GI pipes
• Ravindra, Jindal, Finolex, Supreme
• Provision for exhaust fan

Doors & Windows:

• Main Door (Burma Teak Door with teak frame 5inch x 3.5inch)
• Door Thickness around 40mm
• Internal Doors (Hardwood Paneled Door up, Sal Wood Frames 4 inch x 3 inch)
• Windows (Sal wood/UPVC Windows with glass and mesh shutters)
• Pooja Room Door – Burma Teak with teak frame 5inch x 2.5inch
• Premium Locks for Main Door (Europa/Godrej or equivalent)
• Brass tower bolts and hinges for main door
• Waterproof membrane doors for bathrooms with handle locks
• Wall-mounted magnetic door stopper for main door and room doors
• MS grill for window with max 125mm spacing, min 10mm thick rod
• Timber for main door and pooja door – Teak wood with two coats of varnish
• Timber for windows and doors – Well-seasoned, free from defects
• All Sal wood works provided with two coats of paint
• Main door size: 4ft x 7ft
• Room door size: 3ft x 7ft
• Bathroom door size: 2ft 6in x 7ft
• Main door frame: 5inch x 3.5inch
• Room & bathroom door frames: 4inch x 3inch

Paint Work:

• Interior Painting (JK Putty + Apcolite Premium Royale Emulsion or equivalent)
• Exterior Painting (Asian Primer + Apex Ultima Exterior Emulsion Paint or equivalent)
• Two coats of wall putty for internal walls and ceiling
• External walls – One coat of primer, two coats of paint
• Enamel paint for MS grill works
• Anti-corrosion coat before MS steel painting

Flooring:

• Living & Dining Flooring (Tiles/Granite/Marble)
• Rooms & Kitchen Flooring (Tiles/Granite)
• Balcony & Open Areas Flooring (Anti-skid tiles)
• Staircase Flooring (Granite/Marble)
• Parking Tiles (Anti-skid tiles)
• Granite/marble minimum thickness of 20mm
• Skirting of tiles/granite, minimum height 75mm
• Extra labor charges applicable for tiles other than 2ft x 2ft

Electrical:

• Fireproof Wires (Finolex or equivalent)
• Switches & Sockets (GM Modular / Legrand or equivalent)
• MCB board (Anchor, Finolex or equivalent)
• Rooms: 4 light points, 1 fan point, 5 plug points for bedside table, TV, study/dressing, air conditioning
• Bathrooms: 2 light points, 1 geyser point, 1 plug point near sink
• Kitchen: 3 light points, 6 plug points (refrigerator, mixer, oven, water purifier, platform)
• Living/Dining/Family Hall: 2 fan points, 5 light points, 6 plug points
• Corridor/Passage/Parking/Utility/Terrace: Light and plug points
• 2-way switches per bedroom
• TV cable provision
• 1 calling bell per house
• Earthing pit

Other Amenities: As per requirements