DESIGN & DRAWINGS:

• 2D Floor Plan

• 3D Elevation

• Structural Design

STRUCTURE:

• Steel: Sunvik, Meenakshi, Kamdhenu, or equivalent

• Aggregates: 20mm & 40mm

• Blocks: Standard Solid Concrete Blocks (6-inch for Exterior Walls & 4-inch for Interior Walls)

• Cement: Dalmia, Penna, or equivalent

• M Sand: For Blockwork & Plastering

• RCC Design Mix: As per structural designer’s recommendation

• Waterproofing: Dr. Fixit

• Foundation: As per structural drawings (5 feet deep foundation provided, additional charges if clayey or rocky strata are found)

• Solid concrete blocks for outer and partition walls

• PCC of 100mm below ground floor flooring

• Internal plastering (1:5 cement mortar), external plastering (1:5 cement mortar), and ceiling plastering (1:4 cement mortar)

• Plaster thickness: 12mm (2 coats)

• Chicken mesh at beam, column, and masonry wall junctions

KITCHEN:

• Ceramic Wall Tiles (2 feet above kitchen slab, up to Rs. 35 per sq. ft.)

• Main Sink Faucet: Jaquar, Parryware, Hindware, or equivalent (up to Rs. 1000)

• Other Faucets & Accessories: ISI Marked

• Kitchen Sink: Stainless Steel Single Sink (worth Rs. 2000)

• Water purification inlet near kitchen sink

• Utility area with water inlet & outlet

• Taps for kitchen and utility area

• Provision for washing machine inlet & outlet in utility/dry balcony

• Provision for exhaust fan

• One kitchen included per 500 sq. ft. of built-up area; additional kitchens charged pro-rata

WASHROOM:

• Bathroom Ceramic Wall Tiles (7 feet height, up to Rs. 35 per sq. ft.)

• Sanitary Ware & CP Fittings (up to Rs. 10,000 per 1000 sq. ft., brands: Jaquar, Hindware, Parryware)

• CPVC Pipe: Astral or equivalent

• Bathroom Accessories: EWC, Health Faucet, Wall Mixer, Overhead Shower

• Bathroom Doors: Waterproof flush doors (Rs. 3000 including fixtures)

• One washroom per 500 sq. ft.; additional washrooms charged pro-rata

• Provision for exhaust fan

DOORS & WINDOWS:

• Main Door: Flush Door with Veneer & Sal Wood Frame (5-inch x 3-inch, worth Rs. 13,000 including fixtures)

• Internal Doors: Membrane/Flush Doors with Laminates (up to Rs. 6,000 including fixtures, Sal Wood Frame 4-inch x 2.5-inch)

• Windows: Aluminum & Mesh Shutters (3-track, worth Rs. 270 per sq. ft.)

• Bathroom Doors: Waterproof Flush Doors (Rs. 6,000 including frames & fixtures)

• Main Door Thickness: 38mm, Internal Doors: 38mm

• Locks: Premium quality (worth Rs. 1,500, brands: Europa, Godrej)

• Standard dimensions for doors and windows

• Window & ventilator openings: 10% of built-up area

PAINTING:

• Interior Painting: JK Putty + Tractor Emulsion or equivalent

• Exterior Painting: Asian Primer + Ace Exterior Emulsion Paint or equivalent

• Two coats of putty for internal walls & ceiling

• One coat of primer + two coats of paint for external walls

• Enamel paint for MS grill works

• Anti-corrosion coat for MS steel painting

FLOORING:

• Living & Dining: Tiles or Granite (up to Rs. 40 per sq. ft.)

• Rooms & Kitchen: Tiles (up to Rs. 40 per sq. ft.)

• Balcony: Anti-skid tiles (up to Rs. 35 per sq. ft.)

• Parking: Anti-skid tiles (up to Rs. 40 per sq. ft.)

• Ceramic tiles for walls: Free from cracks, spots, and chipped edges

• Granite: Minimum thickness of 19mm

• Skirting height: Minimum 75mm

• Extra labor charges for non-standard tile sizes

ELECTRICAL:

• Fireproof Wires: Finolex

• Switches & Sockets: Anchor Roma

• MCB Board: Anchor, Finolex, or equivalent

• Standard electrical points for rooms, bathrooms, kitchen, and common areas

• TV cable provision

• Earthing pit per 1000 sq. ft.

• Wiring for UPS not included

OTHER AMENITIES:

• As per requirements